Ultrak CCU-100HD Manual de usuario descargar pdf (Pagina 54)

3-4

If an operator calls a control camera displayed on one of the

other JPD-100s in the system; the operator gets control of the

camera. The other controller's display still shows it as the

control camera; but loses manual control. To regain control of

the camera displayed on the JPD-100, press the CNTL key on

the JPD-100 keypad.

2. Alarm Display

If an AIU-100 Alarm Interface Unit or a host computer is

installed in the system, the oldest alarm number (A###) from

these devices is displayed on the second line of the JPD-100

LCD display. When the displayed alarm is acknowledged, the

next oldest alarm appears on the display.

CNTL - CAM 3 MON 4

A###

If the video alarms monitored by the HD switcher are enabled,

the oldest video alarm (V###) from the switcher is displayed on

the second line of the JPD-100 LCD display. When the

displayed alarm is acknowledged, the next oldest alarm

appears on the display.

CNTL - CAM 3 MON 4

V###

The standard alarms and the video alarms can be

acknowledged individually or all standard or video alarms can

be acknowledged at the JPD-100 Controller. Refer to the JPD-

100 Joystick Controller User's Manual for the procedures to

acknowledge alarms. An alarm can be automatically

acknowledged in the MultiCall assigned to the alarm.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 153 154

Sin comentarios

Ultrak CCU-100HD Manual de usuario Pagina 54